Dark Audio 85×2 Amplifier

Dark Audio Industries USA 85×2 amplifier. The 85×2 was engineered, tested, and carefully
handmade in the USA.

It features the following specifications:

● 8 gauge removable power inputs.
● 16 gauge removable remote input and speaker outputs.
● Separate HPF/LPF for each channel.
● 6db Fixed high pass filter at 80hz.
● 6db Fixed low pass filter at 100hz
● Full range mode.
● 10v – 16.2v input voltage.
● 20hz-20khz frequency response.
● 0.05% THD at 80% of rated power.
● 1% THD at rated power.
● Damping factor: >70
● Signal to noise ratio: 78db
● Built in clip indicator at 1% THD
● Built in overcurrent protection.
● Built in short circuit protection.
● Built in overtemp protection.
● 20 amps of onboard fusing.
● Low profile 3.6″ x 5.5″ x 1.5″ lightweight heatsink.
● Each amplifier produced goes through a one-hour endurance test to ensure its functionality.
Power Ratings at 14.4 volts:
● 28W x 2 at 4 ohm
● 52W x 2 at 2 ohm
● 85W x 2 at 1 ohm
Power Ratings at 16.2 volts:
● 32W x 2 at 4 ohm
● 58W x 2 at 2 ohm
● 95W x 2 at 1 ohm

Weight: 9 oz

Dimensions:  3.6″ x 5.5″ x 1.5″